[. . . ] €  Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items. €  Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this may cause risk of fire / explosion. €  Run over the supply cord when using your cleaner or remove the plug by pulling on the supply cord. €  Stand on or wrap the power cord around arms or legs when using the cleaner. [. . . ] parquet Caresse Nozzle – For parquet floors and other delicate floors. Allergen Remover Turbo Nozzle – Use the turbo nozzle for deep cleaning on carpets. Cleaning the washable filters The cleaner is fitted with a blue hepa filter pack. To maintain optimum cleaning performance regularly remove the the filters and tap against the side of the bin to release dust. The filters should be washed every 3 months or when the filter has excessive dust level. [11] Remove the filter pack by pressing down on the retainer catch to release. Gently tap and wash the grey foam micro filter attached to the filter frame using warm water. Remove excess water from the filter and leave to dry fully before re-using. Remove excess water from the filter and leave to dry fully before re-using. Allergen Remover Mini Turbo Nozzle – Use the mini turbo nozzle on stairs or for deepcleaning on textile surfaces and other hard to clean areas. IMPORTANT: Do not use the turbo and mini turbo nozzles on rugs with long fringes, animal hides and carpet pile deeper than 15mm. 6 NOTE: Ensure the carry handle is at its down position before opening the filter door. Indd 6 09/05/2008 12:15:25 GB Cleaning the cylonic unit If necessary the cyclone unit can be removed from the cyclonic cassette and cleaned. Remove dust container from the cleaner by releasing the container carry handle to detach the dust container from the main cleaner and pull upward to remove. [8, 9] Place the bin on a flat surface and unclip the clips from either side of the dust container. [16] Using the bin handle lift the bin upper section containing the cyclonic unit from the lower section. [17] Use a cloth to remove excessive dust from the cyclone unit’s surface. [18] Reassemble the bin upper section taking care to align the arrows on the container. To lock in place push the container carry handle down until the latch connects with the main body of the cleaner. Once correctly retained the carry handle will sits flush with the top of the cleaner. important Information Hoover spares and Consumables Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. [. . . ] Fjern støvbeholderen fra støvsugeren ved at udløse beholderens bærehåndtag for at demontere støvbeholderen fra hoveddelen, og træk opad for at fjerne den. British Electrotechnical Approvals Board (BEAB), den uafhængige britiske nationale myndighed for sikkerhed i forbindelse med husholdningselartikler, sikrer, at europæiske sikkerhedsstandarder opfyldes og vedligeholdes i en artikels levetid. Frigjør beholderens bærehåndtak ved å løfte opp den midtre låsen for å låse av støvbeholderen fra støvsugerens hoveddel og dra oppover for å fjerne. Tilbehør Referer til modellspesifikasjonene på emballasjeetiketten for inkludering av tilbehør for individuelle modeller. [. . . ]